Base Plate Removable Tab


Click Image to Enlarge

Product Information
Online Price:
$592.90

Online Availability:
Out Of Stock
In Store Availability:
Call 1-800-673-7389

In store price may be different from the online price above
Item:
5601979
Mfr #:
BX1979
UPC:
798459064901
Rating:
Not Yet Reviewed
Sorry, this item is no longer available for purchase.
Additional Information
 
Custom fit bracket kit for attaching to cars frame to allow towing by motorhome or another tow vehicle.

 PROP 65 WARNING: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov

Application Notes
MfrNameMakeModelYearMfrPNNotesIR
Blue OXDodgeRam Pickup 1500 (SXT regular cab)2008BX19791,4,9,11, 512
Notes: 1: Bumper fascia must be removed and replaced during installation., 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.Notes: 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 4: Requires some trimming of the air dam., 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 4: Requires some trimming of the air dam.: 4: 84-89 Acura Integras utilize 2 different brackets. The distinction is usually between 2dr and 4dr. However very rarely, the frames have been interchanged, requiring the opposite bracket design. To verify which bracket is necessary, look at the bolts that hold the E-A unit (Energy Absorbtion Unit) to the frame tower on the drivers side. If the E-A unit is bolted on with 3 bolts@ 1,7,& 9 o'clock positions, then the 1510-3 designed for the 2dr is necessary. If it is bolted with 2 bolts, one at 3 o'clock & 9 o'clock positions, then the 1510-1 designed for the 4dr is to be used. If it is bolted with 2 bolts, one @ 1 o'clock & one @ 7 o'clock, neither bracket will work., 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 4: Requires some trimming of the air dam.: 4: 84-89 Acura Integras utilize 2 different brackets. The distinction is usually between 2dr and 4dr. However very rarely, the frames have been interchanged, requiring the opposite bracket design. To verify which bracket is necessary, look at the bolts that hold the E-A unit (Energy Absorbtion Unit) to the frame tower on the drivers side. If the E-A unit is bolted on with 3 bolts@ 1,7,& 9 o'clock positions, then the 1510-3 designed for the 2dr is necessary. If it is bolted with 2 bolts, one at 3 o'clock & 9 o'clock positions, then the 1510-1 designed for the 4dr is to be used. If it is bolted with 2 bolts, one @ 1 o'clock & one @ 7 o'clock, neither bracket will work.: 4: Baseplate is concealed through the bumper opening.Notes: 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 4: Requires some trimming of the air dam.: 4: 84-89 Acura Integras utilize 2 different brackets. The distinction is usually between 2dr and 4dr. However very rarely, the frames have been interchanged, requiring the opposite bracket design. To verify which bracket is necessary, look at the bolts that hold the E-A unit (Energy Absorbtion Unit) to the frame tower on the drivers side. If the E-A unit is bolted on with 3 bolts@ 1,7,& 9 o'clock positions, then the 1510-3 designed for the 2dr is necessary. If it is bolted with 2 bolts, one at 3 o'clock & 9 o'clock positions, then the 1510-1 designed for the 4dr is to be used. If it is bolted with 2 bolts, one @ 1 o'clock & one @ 7 o'clock, neither bracket will work.: 4: Baseplate is concealed through the bumper opening.: 9: Tow hooks must be removed and remain off the vehicle after installation., 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 4: Requires some trimming of the air dam.: 4: 84-89 Acura Integras utilize 2 different brackets. The distinction is usually between 2dr and 4dr. However very rarely, the frames have been interchanged, requiring the opposite bracket design. To verify which bracket is necessary, look at the bolts that hold the E-A unit (Energy Absorbtion Unit) to the frame tower on the drivers side. If the E-A unit is bolted on with 3 bolts@ 1,7,& 9 o'clock positions, then the 1510-3 designed for the 2dr is necessary. If it is bolted with 2 bolts, one at 3 o'clock & 9 o'clock positions, then the 1510-1 designed for the 4dr is to be used. If it is bolted with 2 bolts, one @ 1 o'clock & one @ 7 o'clock, neither bracket will work.: 4: Baseplate is concealed through the bumper opening.: 9: Tow hooks must be removed and remain off the vehicle after installation.: 9: Due to the different front-end trim packages used on these Ford & Mercury cars, it may be necessary to take a measurement in order to obtain the proper bracket kit #. The measurement is taken from the front bottom face of the frame, where it ends just behind the bumper (below the radiator). If the measurement is:9 1/2" or less-use the 421-1 bracket. 11 1/2" or less use 417-2 bracket 13 1/2" or less use the 415-1 bracket. Use the 417-3 bracket if there's no painted plastic under the bumper., 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 4: Requires some trimming of the air dam.: 4: 84-89 Acura Integras utilize 2 different brackets. The distinction is usually between 2dr and 4dr. However very rarely, the frames have been interchanged, requiring the opposite bracket design. To verify which bracket is necessary, look at the bolts that hold the E-A unit (Energy Absorbtion Unit) to the frame tower on the drivers side. If the E-A unit is bolted on with 3 bolts@ 1,7,& 9 o'clock positions, then the 1510-3 designed for the 2dr is necessary. If it is bolted with 2 bolts, one at 3 o'clock & 9 o'clock positions, then the 1510-1 designed for the 4dr is to be used. If it is bolted with 2 bolts, one @ 1 o'clock & one @ 7 o'clock, neither bracket will work.: 4: Baseplate is concealed through the bumper opening.: 9: Tow hooks must be removed and remain off the vehicle after installation.: 9: Due to the different front-end trim packages used on these Ford & Mercury cars, it may be necessary to take a measurement in order to obtain the proper bracket kit #. The measurement is taken from the front bottom face of the frame, where it ends just behind the bumper (below the radiator). If the measurement is:9 1/2" or less-use the 421-1 bracket. 11 1/2" or less use 417-2 bracket 13 1/2" or less use the 415-1 bracket. Use the 417-3 bracket if there's no painted plastic under the bumper.: 9: Baseplate is adaptable to BlueOx tow bars with a 3-prong clevis.Notes: 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 4: Requires some trimming of the air dam.: 4: 84-89 Acura Integras utilize 2 different brackets. The distinction is usually between 2dr and 4dr. However very rarely, the frames have been interchanged, requiring the opposite bracket design. To verify which bracket is necessary, look at the bolts that hold the E-A unit (Energy Absorbtion Unit) to the frame tower on the drivers side. If the E-A unit is bolted on with 3 bolts@ 1,7,& 9 o'clock positions, then the 1510-3 designed for the 2dr is necessary. If it is bolted with 2 bolts, one at 3 o'clock & 9 o'clock positions, then the 1510-1 designed for the 4dr is to be used. If it is bolted with 2 bolts, one @ 1 o'clock & one @ 7 o'clock, neither bracket will work.: 4: Baseplate is concealed through the bumper opening.: 9: Tow hooks must be removed and remain off the vehicle after installation.: 9: Due to the different front-end trim packages used on these Ford & Mercury cars, it may be necessary to take a measurement in order to obtain the proper bracket kit #. The measurement is taken from the front bottom face of the frame, where it ends just behind the bumper (below the radiator). If the measurement is:9 1/2" or less-use the 421-1 bracket. 11 1/2" or less use 417-2 bracket 13 1/2" or less use the 415-1 bracket. Use the 417-3 bracket if there's no painted plastic under the bumper.: 9: Baseplate is adaptable to BlueOx tow bars with a 3-prong clevis.: 11: Be sure to confirm the weight of your individual vehicle before towing. Some models, depending on options and lead, may exceed the weight rating of specific tow bars. Always insure both your tow bar and hitch are adequately rated for the vehicle’s overall weight., 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 4: Requires some trimming of the air dam.: 4: 84-89 Acura Integras utilize 2 different brackets. The distinction is usually between 2dr and 4dr. However very rarely, the frames have been interchanged, requiring the opposite bracket design. To verify which bracket is necessary, look at the bolts that hold the E-A unit (Energy Absorbtion Unit) to the frame tower on the drivers side. If the E-A unit is bolted on with 3 bolts@ 1,7,& 9 o'clock positions, then the 1510-3 designed for the 2dr is necessary. If it is bolted with 2 bolts, one at 3 o'clock & 9 o'clock positions, then the 1510-1 designed for the 4dr is to be used. If it is bolted with 2 bolts, one @ 1 o'clock & one @ 7 o'clock, neither bracket will work.: 4: Baseplate is concealed through the bumper opening.: 9: Tow hooks must be removed and remain off the vehicle after installation.: 9: Due to the different front-end trim packages used on these Ford & Mercury cars, it may be necessary to take a measurement in order to obtain the proper bracket kit #. The measurement is taken from the front bottom face of the frame, where it ends just behind the bumper (below the radiator). If the measurement is:9 1/2" or less-use the 421-1 bracket. 11 1/2" or less use 417-2 bracket 13 1/2" or less use the 415-1 bracket. Use the 417-3 bracket if there's no painted plastic under the bumper.: 9: Baseplate is adaptable to BlueOx tow bars with a 3-prong clevis.: 11: Be sure to confirm the weight of your individual vehicle before towing. Some models, depending on options and lead, may exceed the weight rating of specific tow bars. Always insure both your tow bar and hitch are adequately rated for the vehicle’s overall weight.: 11: Measure outside across the front of the sub-frame horns under the isolation damper. 47 1/2=158-1 for Buick or 158-2 for Cadillac & Oldsmobile 49 1/2"=158-4Notes: N/A

Product Reviews No Product Reviews Available for This Item.
To add a review, please Login or Create New Account.