| Notes: 1: Bumper fascia must be removed and replaced during installation., 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.Notes: 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 2: Requires some trimming of bumper (fascia, plastic, and/or grill)., 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 2: Requires some trimming of bumper (fascia, plastic, and/or grill).: 2: ***********note deleted********************************, 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 2: Requires some trimming of bumper (fascia, plastic, and/or grill).: 2: ***********note deleted********************************: 2: Not available at time of printing.Notes: 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 2: Requires some trimming of bumper (fascia, plastic, and/or grill).: 2: ***********note deleted********************************: 2: Not available at time of printing.: 3: Requires some drilling (not major)., 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 2: Requires some trimming of bumper (fascia, plastic, and/or grill).: 2: ***********note deleted********************************: 2: Not available at time of printing.: 3: Requires some drilling (not major).: 3: Trimming the lower air dam, air deflector, cowling and/or rock guard is required on this model., 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 2: Requires some trimming of bumper (fascia, plastic, and/or grill).: 2: ***********note deleted********************************: 2: Not available at time of printing.: 3: Requires some drilling (not major).: 3: Trimming the lower air dam, air deflector, cowling and/or rock guard is required on this model.: 3: Baseplate is concealed through the air dam.Notes: 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 2: Requires some trimming of bumper (fascia, plastic, and/or grill).: 2: ***********note deleted********************************: 2: Not available at time of printing.: 3: Requires some drilling (not major).: 3: Trimming the lower air dam, air deflector, cowling and/or rock guard is required on this model.: 3: Baseplate is concealed through the air dam.: 9: Tow hooks must be removed and remain off the vehicle after installation., 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 2: Requires some trimming of bumper (fascia, plastic, and/or grill).: 2: ***********note deleted********************************: 2: Not available at time of printing.: 3: Requires some drilling (not major).: 3: Trimming the lower air dam, air deflector, cowling and/or rock guard is required on this model.: 3: Baseplate is concealed through the air dam.: 9: Tow hooks must be removed and remain off the vehicle after installation.: 9: Due to the different front-end trim packages used on these Ford & Mercury cars, it may be necessary to take a measurement in order to obtain the proper bracket kit #. The measurement is taken from the front bottom face of the frame, where it ends just behind the bumper (below the radiator). If the measurement is:9 1/2" or less-use the 421-1 bracket. 11 1/2" or less use 417-2 bracket 13 1/2" or less use the 415-1 bracket. Use the 417-3 bracket if there's no painted plastic under the bumper., 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 2: Requires some trimming of bumper (fascia, plastic, and/or grill).: 2: ***********note deleted********************************: 2: Not available at time of printing.: 3: Requires some drilling (not major).: 3: Trimming the lower air dam, air deflector, cowling and/or rock guard is required on this model.: 3: Baseplate is concealed through the air dam.: 9: Tow hooks must be removed and remain off the vehicle after installation.: 9: Due to the different front-end trim packages used on these Ford & Mercury cars, it may be necessary to take a measurement in order to obtain the proper bracket kit #. The measurement is taken from the front bottom face of the frame, where it ends just behind the bumper (below the radiator). If the measurement is:9 1/2" or less-use the 421-1 bracket. 11 1/2" or less use 417-2 bracket 13 1/2" or less use the 415-1 bracket. Use the 417-3 bracket if there's no painted plastic under the bumper.: 9: Baseplate is adaptable to BlueOx tow bars with a 3-prong clevis.Notes: 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 2: Requires some trimming of bumper (fascia, plastic, and/or grill).: 2: ***********note deleted********************************: 2: Not available at time of printing.: 3: Requires some drilling (not major).: 3: Trimming the lower air dam, air deflector, cowling and/or rock guard is required on this model.: 3: Baseplate is concealed through the air dam.: 9: Tow hooks must be removed and remain off the vehicle after installation.: 9: Due to the different front-end trim packages used on these Ford & Mercury cars, it may be necessary to take a measurement in order to obtain the proper bracket kit #. The measurement is taken from the front bottom face of the frame, where it ends just behind the bumper (below the radiator). If the measurement is:9 1/2" or less-use the 421-1 bracket. 11 1/2" or less use 417-2 bracket 13 1/2" or less use the 415-1 bracket. Use the 417-3 bracket if there's no painted plastic under the bumper.: 9: Baseplate is adaptable to BlueOx tow bars with a 3-prong clevis.: 12: Baseplate has non-24" spaced attachment tabs. Requires either a motorhome mounted tow bar or an adapter to utilize a car mounted tow bar. The SO:BX88153 adapter can not be used on non 24" baseplates. Tow bar adapters are not to be used with vehicles weighing over 5000 lbs., 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 2: Requires some trimming of bumper (fascia, plastic, and/or grill).: 2: ***********note deleted********************************: 2: Not available at time of printing.: 3: Requires some drilling (not major).: 3: Trimming the lower air dam, air deflector, cowling and/or rock guard is required on this model.: 3: Baseplate is concealed through the air dam.: 9: Tow hooks must be removed and remain off the vehicle after installation.: 9: Due to the different front-end trim packages used on these Ford & Mercury cars, it may be necessary to take a measurement in order to obtain the proper bracket kit #. The measurement is taken from the front bottom face of the frame, where it ends just behind the bumper (below the radiator). If the measurement is:9 1/2" or less-use the 421-1 bracket. 11 1/2" or less use 417-2 bracket 13 1/2" or less use the 415-1 bracket. Use the 417-3 bracket if there's no painted plastic under the bumper.: 9: Baseplate is adaptable to BlueOx tow bars with a 3-prong clevis.: 12: Baseplate has non-24" spaced attachment tabs. Requires either a motorhome mounted tow bar or an adapter to utilize a car mounted tow bar. The SO:BX88153 adapter can not be used on non 24" baseplates. Tow bar adapters are not to be used with vehicles weighing over 5000 lbs.: 12: 2 different tie downs replacements can be found on the 84-85 Honda Accords & 88-90 Acura Legends. A measurement must be taken from the center of the first bolt going up into the sub-frame directly behind the tie down plate to the center of the eye on the tie down plate. If the measurement is approx. 3 1/2", use the 1503-1 bracket. If this measurement is approx. 4 3/4" use the 1505-1 bracket.Notes: 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 2: Requires some trimming of bumper (fascia, plastic, and/or grill).: 2: ***********note deleted********************************: 2: Not available at time of printing.: 3: Requires some drilling (not major).: 3: Trimming the lower air dam, air deflector, cowling and/or rock guard is required on this model.: 3: Baseplate is concealed through the air dam.: 9: Tow hooks must be removed and remain off the vehicle after installation.: 9: Due to the different front-end trim packages used on these Ford & Mercury cars, it may be necessary to take a measurement in order to obtain the proper bracket kit #. The measurement is taken from the front bottom face of the frame, where it ends just behind the bumper (below the radiator). If the measurement is:9 1/2" or less-use the 421-1 bracket. 11 1/2" or less use 417-2 bracket 13 1/2" or less use the 415-1 bracket. Use the 417-3 bracket if there's no painted plastic under the bumper.: 9: Baseplate is adaptable to BlueOx tow bars with a 3-prong clevis.: 12: Baseplate has non-24" spaced attachment tabs. Requires either a motorhome mounted tow bar or an adapter to utilize a car mounted tow bar. The SO:BX88153 adapter can not be used on non 24" baseplates. Tow bar adapters are not to be used with vehicles weighing over 5000 lbs.: 12: 2 different tie downs replacements can be found on the 84-85 Honda Accords & 88-90 Acura Legends. A measurement must be taken from the center of the first bolt going up into the sub-frame directly behind the tie down plate to the center of the eye on the tie down plate. If the measurement is approx. 3 1/2", use the 1503-1 bracket. If this measurement is approx. 4 3/4" use the 1505-1 bracket.: 13: Use only with motorhome mount tow bars or the 5608833 or 5688151 adapters. Removable tabs with only one hole will not attach to car mount tow bars or other adapters. The Acclaim may only be used with removable tab baseplates that have 22" or greater spaced tabs. The Adventurer may be used with baseplates having 24"-40" spaced removable tabs. The Ambassador may only be used with 24" spaced removable tabs., 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 2: Requires some trimming of bumper (fascia, plastic, and/or grill).: 2: ***********note deleted********************************: 2: Not available at time of printing.: 3: Requires some drilling (not major).: 3: Trimming the lower air dam, air deflector, cowling and/or rock guard is required on this model.: 3: Baseplate is concealed through the air dam.: 9: Tow hooks must be removed and remain off the vehicle after installation.: 9: Due to the different front-end trim packages used on these Ford & Mercury cars, it may be necessary to take a measurement in order to obtain the proper bracket kit #. The measurement is taken from the front bottom face of the frame, where it ends just behind the bumper (below the radiator). If the measurement is:9 1/2" or less-use the 421-1 bracket. 11 1/2" or less use 417-2 bracket 13 1/2" or less use the 415-1 bracket. Use the 417-3 bracket if there's no painted plastic under the bumper.: 9: Baseplate is adaptable to BlueOx tow bars with a 3-prong clevis.: 12: Baseplate has non-24" spaced attachment tabs. Requires either a motorhome mounted tow bar or an adapter to utilize a car mounted tow bar. The SO:BX88153 adapter can not be used on non 24" baseplates. Tow bar adapters are not to be used with vehicles weighing over 5000 lbs.: 12: 2 different tie downs replacements can be found on the 84-85 Honda Accords & 88-90 Acura Legends. A measurement must be taken from the center of the first bolt going up into the sub-frame directly behind the tie down plate to the center of the eye on the tie down plate. If the measurement is approx. 3 1/2", use the 1503-1 bracket. If this measurement is approx. 4 3/4" use the 1505-1 bracket.: 13: Use only with motorhome mount tow bars or the 5608833 or 5688151 adapters. Removable tabs with only one hole will not attach to car mount tow bars or other adapters. The Acclaim may only be used with removable tab baseplates that have 22" or greater spaced tabs. The Adventurer may be used with baseplates having 24"-40" spaced removable tabs. The Ambassador may only be used with 24" spaced removable tabs.: 13: If the vehicle has tack-welded tie down plates, the plates will need to be removed before mounting brackets. This will add to the installation time. |