Notes: 1: Bumper fascia must be removed and replaced during installation., 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.Notes: 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 3: Requires some drilling (not major)., 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 3: Requires some drilling (not major).: 3: Trimming the lower air dam, air deflector, cowling and/or rock guard is required on this model., 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 3: Requires some drilling (not major).: 3: Trimming the lower air dam, air deflector, cowling and/or rock guard is required on this model.: 3: Baseplate is concealed through the air dam.Notes: 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 3: Requires some drilling (not major).: 3: Trimming the lower air dam, air deflector, cowling and/or rock guard is required on this model.: 3: Baseplate is concealed through the air dam.: 4: Requires some trimming of the air dam., 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 3: Requires some drilling (not major).: 3: Trimming the lower air dam, air deflector, cowling and/or rock guard is required on this model.: 3: Baseplate is concealed through the air dam.: 4: Requires some trimming of the air dam.: 4: 84-89 Acura Integras utilize 2 different brackets. The distinction is usually between 2dr and 4dr. However very rarely, the frames have been interchanged, requiring the opposite bracket design. To verify which bracket is necessary, look at the bolts that hold the E-A unit (Energy Absorbtion Unit) to the frame tower on the drivers side. If the E-A unit is bolted on with 3 bolts@ 1,7,& 9 o'clock positions, then the 1510-3 designed for the 2dr is necessary. If it is bolted with 2 bolts, one at 3 o'clock & 9 o'clock positions, then the 1510-1 designed for the 4dr is to be used. If it is bolted with 2 bolts, one @ 1 o'clock & one @ 7 o'clock, neither bracket will work., 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 3: Requires some drilling (not major).: 3: Trimming the lower air dam, air deflector, cowling and/or rock guard is required on this model.: 3: Baseplate is concealed through the air dam.: 4: Requires some trimming of the air dam.: 4: 84-89 Acura Integras utilize 2 different brackets. The distinction is usually between 2dr and 4dr. However very rarely, the frames have been interchanged, requiring the opposite bracket design. To verify which bracket is necessary, look at the bolts that hold the E-A unit (Energy Absorbtion Unit) to the frame tower on the drivers side. If the E-A unit is bolted on with 3 bolts@ 1,7,& 9 o'clock positions, then the 1510-3 designed for the 2dr is necessary. If it is bolted with 2 bolts, one at 3 o'clock & 9 o'clock positions, then the 1510-1 designed for the 4dr is to be used. If it is bolted with 2 bolts, one @ 1 o'clock & one @ 7 o'clock, neither bracket will work.: 4: Baseplate is concealed through the bumper opening.Notes: 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 3: Requires some drilling (not major).: 3: Trimming the lower air dam, air deflector, cowling and/or rock guard is required on this model.: 3: Baseplate is concealed through the air dam.: 4: Requires some trimming of the air dam.: 4: 84-89 Acura Integras utilize 2 different brackets. The distinction is usually between 2dr and 4dr. However very rarely, the frames have been interchanged, requiring the opposite bracket design. To verify which bracket is necessary, look at the bolts that hold the E-A unit (Energy Absorbtion Unit) to the frame tower on the drivers side. If the E-A unit is bolted on with 3 bolts@ 1,7,& 9 o'clock positions, then the 1510-3 designed for the 2dr is necessary. If it is bolted with 2 bolts, one at 3 o'clock & 9 o'clock positions, then the 1510-1 designed for the 4dr is to be used. If it is bolted with 2 bolts, one @ 1 o'clock & one @ 7 o'clock, neither bracket will work.: 4: Baseplate is concealed through the bumper opening.: 13: Use only with motorhome mount tow bars or the 5608833 or 5688151 adapters. Removable tabs with only one hole will not attach to car mount tow bars or other adapters. The Acclaim may only be used with removable tab baseplates that have 22" or greater spaced tabs. The Adventurer may be used with baseplates having 24"-40" spaced removable tabs. The Ambassador may only be used with 24" spaced removable tabs., 1: Bumper fascia must be removed and replaced during installation.: 1: Trimming of spoiler, air dam, grille or plastic fascia may be required on some models of this vehicle.: 3: Requires some drilling (not major).: 3: Trimming the lower air dam, air deflector, cowling and/or rock guard is required on this model.: 3: Baseplate is concealed through the air dam.: 4: Requires some trimming of the air dam.: 4: 84-89 Acura Integras utilize 2 different brackets. The distinction is usually between 2dr and 4dr. However very rarely, the frames have been interchanged, requiring the opposite bracket design. To verify which bracket is necessary, look at the bolts that hold the E-A unit (Energy Absorbtion Unit) to the frame tower on the drivers side. If the E-A unit is bolted on with 3 bolts@ 1,7,& 9 o'clock positions, then the 1510-3 designed for the 2dr is necessary. If it is bolted with 2 bolts, one at 3 o'clock & 9 o'clock positions, then the 1510-1 designed for the 4dr is to be used. If it is bolted with 2 bolts, one @ 1 o'clock & one @ 7 o'clock, neither bracket will work.: 4: Baseplate is concealed through the bumper opening.: 13: Use only with motorhome mount tow bars or the 5608833 or 5688151 adapters. Removable tabs with only one hole will not attach to car mount tow bars or other adapters. The Acclaim may only be used with removable tab baseplates that have 22" or greater spaced tabs. The Adventurer may be used with baseplates having 24"-40" spaced removable tabs. The Ambassador may only be used with 24" spaced removable tabs.: 13: If the vehicle has tack-welded tie down plates, the plates will need to be removed before mounting brackets. This will add to the installation time. |